Garage door springs are under constant tension, making them one of the most common parts to break on a garage door. These springs are essential for counterbalancing the weight of the door, allowing it to open and close smoothly with minimal effort. A sudden failure can be both inconvenient and costly.
However, by following a few simple maintenance tips, you can help extend the life of your garage door springs and avoid expensive repairs. At Emu Garage Doors, we understand how a sudden failure can be both inconvenient and costly.
Types of Garage Door Springs
There are two main types of garage door springs:
- Torsion Springs: Located above the garage door, torsion springs are more common in modern garage doors. They operate by twisting to generate the force needed to lift the door.
- Extension Springs: Found on either side of the garage door, extension springs stretch, and contract to assist in lifting the door. They are often used in older garage door models.
Maintenance Tips
Keeping your garage door springs in good condition requires regular garage door maintenance. Here are some essential tips:
- Lubricate the Springs Regularly: Apply a silicone-based lubricant or white lithium grease to reduce friction and prevent rust. This should be done at least twice a year.
- Inspect for Wear and Tear: Look for signs of cracks, rust, or damage. If you notice any issues, replace the springs immediately to prevent further damage or potential accidents.
- Keep the Tracks Clean: Ensure the tracks are free of debris to prevent the springs from binding. Dirt and debris can cause misalignment and put extra strain on the springs.
- Check Door Balance: An unbalanced door puts undue stress on the springs. To check the balance, disconnect the opener and manually lift the door halfway. If it stays in place, it’s balanced. If it moves up or down, a professional adjustment is needed.
- Schedule Professional Inspections: Have your springs professionally inspected and serviced annually to catch potential issues early and ensure safe operation.
Safety Tips
Garage door springs are under high tension and can be dangerous. Follow these safety precautions:
- Never Attempt DIY Repairs: Repairing or replacing garage door springs should only be done by a qualified professional due to the risk of injury.
- Disconnect Power: Always disconnect the power to the garage door opener before working on any part of the garage door.
- Handle with Care: Even when performing simple maintenance, be cautious when near the springs, as they can cause serious injury if mishandled.
By following these simple maintenance tips, you can extend the life of your garage door springs and avoid costly repairs. Regular inspections, lubrication, and professional check-ups will keep your garage door operating smoothly.
If you have any questions or concerns about your garage door springs, contact a qualified garage door technician for assistance.
Emu garage door Additional Tips
- Consider Heavy-Duty Springs: Upgrading to heavy-duty springs can increase longevity and reduce the likelihood of breakage.
- Adjust for Weather Conditions: In areas with extreme weather, lubricate your springs more frequently to prevent rust and wear.
- Listen for Unusual Noises: Squeaking or grinding noises can indicate spring issues. Have them inspected by a professional promptly.
If you are concerned about the condition of your garage door springs, don’t wait for a problem to arise. Contact a qualified garage door technician for a thorough inspection and ensure your garage door operates safely and efficiently.
If you are concerned about the condition of your garage door spring in Sydney. don’t wait for a problem to arise. Neglecting maintenance can lead to unexpected breakdowns, costly emergency repairs, or even serious safety hazards. Contact Emu Garage Doors today for a thorough inspection and professional servicing. Call us at 02 9030 0686 to ensure your garage door operates safely and efficiently.
+ There are no comments
Add yours